When I first got this Vaio I made the recovery & repair discs... unfortunately I made them on DVD-RW and apparently they are not compatible (don't work) I also did a system image on my external hard drive... and again does not work. I no longer have the recovery partition available so ya there's that issue & if none of this is enough... I have unsuccessfully attempted to obtain the oem software...
Vaio VPCEH system recovery & system repair discs not working
↧
↧
New Installation Win Prof 7 64bit fails, wrong disc is taken...
Hello,
the Hd from a Samsung 530 U Notebook was broken, so it was installed a new SSD (250 GB).
Each time, when windows is installed (from USB), there are listed two devices. One 15 GB and the new SSD 250 GB. Both devices were formatted. The 250 GB device was choosen for installation. Copying, installation all works well. Only the Boot from the SSD doesn't work. When I choose the repair-Mode...
↧
Trying to restore to an image after wiping drive
I'm really a novice at this but my son is using Macrium Reflect Pro 5.0 to backup to create images for a Windows 7 Dell XPX 8700 PC. He ended up with some corrupt files and I was told by a computer tech (he messed with his PC for an hour) that I either needed to wipe the hard drive and do a Clean Install, or try to restore to an earlier image. I had just done an image backup the day before...
↧
normal install time
I have install w7 many times in the past. I have always done a fresh install. I bought a new copy for my internet computer and would like to do an upgrade install, I don't want to reload all the software.
So from my current windows vista I ran the upgrade/install and it gets to a point after it gathered all the information at the start of the install and it is copying files and it stays on 0%...
↧
New computer corrupted Win 7 64 bit
Have a new HP ProDesk 300G i5 64bit with Windows 7 Professional 64 bit Svc Pack 1. During initial setup, I loaded a Canon scanner and the driver from the net (before I made a restore starting point, my bad) and the the software has screwed up my registry (and doesn't work). Tried cleaning it up and started getting start up error messages so I bought a new Windows 7 Pro 64 bit disk and tried to...
↧
↧
How to create a .WIM file from Windows.7.ultimate.iso
I mounted the image with Daemon Tools, but there is only one WIM file
There it says: boot.wim, it is very small, and does not contain all the information that I need.
Install.esd should be the file.
Image: https://lut.im/ZKzcmOQJRM/akqgZfZ1kvJVbdYm.jpg
I want to save WIM-file into any HDDfolder. Is to use DISM on windows 7 following this manual.
How to use Windows 7 DISM by Muiz -...
↧
Recovery disk from recovery partition?
I recently restored the operating system for my sister's Dell Latitude, It had become very, very slow, and so I would have expected that it would be a lot faster. Not so. It crawls, and I can't figure out why. What I'd like to do is a clean install, but I don't want to reformat the C drive because I'll afraid that will make the recovery partition (which doesn't have a drive letter)...
↧
Windows 7 stuck booting on pulsing logo
Last night my desktop PC with 3 HDDs got stuck booting at the pulsing Windows 7 logo. I rebooted, and ran the "Launch Startup Repair" option. After running it and rebooting the system still stuck.
I then booted from the Windows 7 installation disk and ran the 'repair your computer' option. In the 'System Recovery Options' menu that followed, there was no operating system listed.
...
↧
"New" Installation to Seagate 250GB Drive Fails after Install Steps
I am currently trying to install Windows 7 64-Bit onto a "new" (refurbished) drive I got for a decent price online. I was forced to use YUMI and create a USB Boot Drive which was working great after my Windows 7 DVD kept giving me the following error: "device driver missing"...
I booted into my original version of Windows 7... the reason we want to install on a new drive is because the current...
↧
↧
Toshiba Sat C855D-S5303 Win7x64 USB eufi Install. HELP! 0xc00...d
Toshiba Satellite C855D-S5303 Windows 7x64 MUST BE eufi Install. HELP!
rufus registers iso from microsoft imagine as eufi compatable, hdd is clean using diskpart and in gpt format
↧
Unattented Installation not Performed Totally
I've trying to set up an unattened file to install Windows 7 automatically. It works but sometimes it ask me to configure the UILanguages manually.
I've tried few times and it seems that this happens when i try to re-install Windows in a workstation where is already deployed. Because when i start from a clean Hard Disk the installation is fully automatic. And i really don't understand how can...
↧
Windows Updates during installation ? (& for non supported OS ?)
Hi All,
Sir/Madam(s),
Every time i go for a clean installation , i get stuck to a screen , in between, asking to choose settings and make windows updates during installation. It, perhaps, tells that pc would be connected to internet all the time during installation. My question(s) are :
1.whether it is safe anyway ? you don't have an antivirus installed and you connect to internet all the...
↧
Windows 7 Installation Problems
Sorry about the vague title, I didn't know what to put.
I want to install Windows 7 so I can dual boot Windows 10 and Windows 7. I have a few ISOs that I have tried but they all give some error. One said that the partition couldn't be installed because it is of GPT type. And the rest get stuck with the installer asking for USB drivers. I also tried to install x86 version but it had the exact...
↧
↧
Installation will not allow input.
I am trying to install Windows 7 Pro on a HP Pavilion All-in-One, that came with Win 10 pre-installed. Once I get to the first menu screen, where you select the language, either it freezes or it just will not allow input from keyboard, mouse, and touch screen.
I have tried different iso files and different USB's and DVD's... still same problem.
Haaalp
↧
Solved easy 2 boot re-imaging software help
so i have a easy to boot flash drive that i use for installing windows and re-imaging pc's that i created a general image of for quick and easy deployment of windows with the software settings ect i want all installed my question is im wondering what these other features on the program i use do or are for (see picture of software )
i boot to the flash drive go to win pe -7x64pe-then open cmd...
↧
help with easy to boot system re imaging software
so i have a easy to boot flash drive that i use for installing windows and re-imaging pc's that i created a general image of for quick and easy deployment of windows with the software settings ect i want all installed my question is im wondering what these other features on the program i use do or are for (see picture of software )
i boot to the flash drive go to win pe -7x64pe-then open cmd...
↧
Windows 7 Asking For Activation Again Error 0XC004C008
Every few months my Windows 7 Pro 64 bit asks for activation with no changes made to the pc or software whatsoever. The only thing changed this time was updates to MalwareBytes free version and Norton Internet Security updates.
Periodically it also gives Error 0XC004C008 and I have to use telephone activation.
Is there a patch or update that will fix this once and for all, cause it is very...
↧
↧
Which partitions can I safely delete from my hard drive?
I restored Windows 7 os from recovery disks I made from a different computer; my computer came with a Dell factory restore partition option, but I didn't use it because I wasn't able to access it or much else on my computer for that matter. After restoring the os, I noticed a new recovery partition made from the disks but also the OEM partition that originally came with the computer....
↧
NUC + Win7 / No Usb3 Drivers / Stuck At Username Screen.
I bought a NUC6i3SYH, Samsung 850 ssd and 4gb Kingston Ram. I can get windows 7 installed but i get stuck at the screen to select a username and password, my wireless keyboard and mouse cease to work and also my wired usb keyboard does not work.
Firstly should i use UEFI or Legacy mode for booting my NUC with win7?
I had a thought that i could plug the Samsung ssd from the nuc into my htpc...
↧
Windows 7 Installation Failure (Device Driver Missing)
Alright, I need your guy's help again. I've been working at this for days now and cannot figure it out. I'm currently on Windows 10 and am downgrading to Windows 7.
I am installing Windows 7 via USB. Upon booting the USB I get this error after clicking "setup".
"A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please...
↧
More Pages to Explore .....
